Li-valve tsa Mini DC solenoid ke likarolo tsa bohlokoa lits'ebetsong tsa sejoale-joale tsa othomathike, lisebelisoa tsa bongaka, le lits'ebetso tsa IoT, moo ts'ebetso ea matla le moralo o kopaneng li leng bohlokoa haholo. Sengoliloeng sena se hlahloba maano a meralo e tsoetseng pele ho fokotsa tšebeliso ea matla li-valve tsena ha o ntse o boloka ts'ebetso, ka leseli mabapi le lits'ebetso tsa lefats'e la nnete le boiphihlelo baPinCheng Motor, moetapele oa tharollo e nepahetseng ea ho laola mokelikeli.

---

1. Mekhoa ea Bohlokoa ea Moqapi bakeng sa Ts'ebetso ea Matla a Tlase

A. Moralo oa Optimized Electromagnetic Coil

Coil ea solenoid ke sesebelisoa sa mantlha sa motlakase. Lintho tse ncha li kenyelletsa:

• Mohala oa Magnet oa Ts'ebetso e Phahameng: Ho sebelisa mohala oa koporo oa ultra-thin (AWG 38-40) o nang le polyimide insulation ho fokotsa khanyetso ka 20-30%, e leng ho nolofalletsang ho hula ka tlaase hona joale.

• Lintho tse Laminated: Silicon steel kapa permalloy cores e fokotsa tahlehelo ea hona joale ea eddy, e ntlafatsa ts'ebetso ea makenete.

• Litlhophiso tsa ho Fetola Habeli: Mokhoa oa mantlha oa ho sebetsa ka potlako (mohlala, 12V pulse) le matsoelintsoeke a bobeli a ho ts'oara (mohlala, 3V) a fokotsa tšebeliso ea motlakase ka 60%.

B. Khetho e Phahameng ea Boitsebiso

• Li-Plunger tse bobebe: Li-alloys tsa Titanium kapa aluminium li fokotsa boima ba 'mele, tse hlokang matla a fokolang bakeng sa ts'ebetso.

• Litiiso Tse Tlase: Litiiso tsa PTFE kapa FKM li fokotsa stiction, li nolofalletsa ts'ebetso e tšepahalang ho matla a tlase a makenete.

• Matlo a Thermally Stable: Li-polymers tsa PPS kapa tsa PEEK li senya mocheso hantle, li thibela ho hoholeha ha tšebetso.

C. Smart Control Electronics

• PWM (Pulse Width Modulation): Ho fetola meeli ea li-cycle cycles ho tšoara hona joale ha u ntse u boloka boemo ba valve. Mohlala, lets'oao la 5V PWM mosebetsing oa 30% le fokotsa tšebeliso ea matla ka 70% ha e bapisoa le motlakase o sa feleng.

• Lipotoloho tsa Hlooho-le-Ho Tšoara: Motlakase o phahameng oa pele (mohlala, 24V) o tiisa ho buleha ka potlako, ho lateloa ke mocheso o tlaase oa ho tšoara (mohlala, 3V) bakeng sa ts'ebetso e tsitsitseng.

D. Ntlafatso ea Sebopeho

• Lekhalo le Fokotseng la Moea: Lisebelisoa tse entsoeng ka mokhoa o nepahetseng li fokotsa lekhalo pakeng tsa plunger le coil, li matlafatsa khokahanyo ea makenete.

• Tuning ea Selemo: Liliba tsa tloaelo li leka-lekanya matla a khoheli le lebelo la ho khutla, li tlosa litšila tsa matla ho tsoa ho overshooting.

---

2. Melemo ea Ts'ebetso le Teko

Liteko tsa Protocol:

• Thermal Cycling: -40 ° C ho +85 ° C ho netefatsa botsitso ba thepa.

• Teko ea Mamello: Lipotoloho tsa 100,000 ho 10 Hz ho hlahloba ho hanyetsa ho apara.

• Leakage Liteko: 1.5 × khatello e kholo (mohlala, 10 bar) bakeng sa lihora tse 24.

---

3. Likopo li Nonoa ke Li-Valves tse Matla a Tlase

• Lisebelisoa tsa Bongaka: Lipompo tsa insulin le li-ventilator tse hlokang <1W ts'ebetso bakeng sa bophelo bo atolositsoeng ba betri.

• Temo e Bohlale: Mekhoa ea mongobo ea mobu e tsamaisoang ke liphanele tsa letsatsi.

• Li-Sensors tsa IoT: Tlhokomelo e se nang mohala ea khase/metsi ka lilemo tsa ts'ebeletso e sa hlokeng tlhokomelo.

---

4. PinCheng Motor: Bopula-maliboho ba Matla a tlaase a Solenoid Valve Solutions

PinCheng Motore ipabola ka ho rala le ho etsa tlhahiso ea boleng bo holimoli-valve tsa solenoid tse nyane tsa DCbakeng sa likopo tse batlang. Li-valve tsa rona li ipabola ho:

Lintlha-khōlō tsa Sehlahisoa

• Tšebeliso e tlase ea Matla a Motlakase: Ka tlase joalo0.5W ho tšoara matlaka taolo ea PWM.

• Compact Footprint: Boholo bo tsoang ho 10mm × 10mm × 15mm bakeng sa mekhoa e thibelang sebaka.

• Wide Voltage Range: Tšebelisano ea 3V–24V DC.

• Boikemisetso: Litlhophiso tsa boema-kepe, lisebelisoa tsa tiiso, le kopanyo ea IoT.

Thuto-pale: Smart Metering ea Metsi

Marang-rang a metsi a masepala a kentse PinCheng'sLetoto la LVS-12li-valve, ho finyella:

• 90% ea ho boloka matlakhahlano le meralo ea setso.

• Zero e lutlalilemo tse fetang 5 libakeng tse senyang.

---

5. Mekhoa ea Bokamoso ho Theknoloji ea Valve ea Matla a Tlase

• Kopanyo ea Kotulo ea Matla: Litsamaiso tsa letsatsi kapa tsa vibration-powered bakeng sa ts'ebetso e ikemetseng.

• AI-Driven Predictive Control: Litaolo tsa ho ithuta ka mochini li ntlafatsa nako ea ts'ebetso ho ipapisitsoe le mekhoa ea ts'ebeliso.

• Likarolo tse Hatisitsoeng tsa 3D: Lijeometri tse bobebe, tse rarahaneng bakeng sa ts'ebetso e ntlafalitsoeng.

---

Qetello

Ho theha matla a tlaseli-valve tsa solenoid tse nyane tsa DCe hloka mokhoa o akaretsang, ho leka-lekanya katleho ea motlakase, mahlale a lintho tse bonahalang, le taolo e bohlale. Lintlafatso tsa moralo oa li-coil, theknoloji ea PWM, le lisebelisoa tse bobebe li sutumelletsa meeli ea ts'ebeliso ea matla ntle le ho beha ts'epahalo.

Lekola litharollo tsa morao-rao tsa PinCheng Motorbakeng sa litlhoko tsa hau tsa taolo ea mokelikeli o tlase oa matla:
Etela webosaete ea semmuso ea PinCheng Motorho sibolla ronali-valve tsa solenoid tse nyane tsa DCle litšebeletso tse tloaelehileng tsa OEM/ODM.